DRV2 Portable Leakage Detector
 



The DRV2 is a frequency agile meter offering full flexibility when choosing your leakage monitoring frequency. Select any frequency in 1 kHz tuning increments and store them as part of your 10 favourite frequency presets.

You can adjust the operating frequency of the meter by using front panel buttons or through our DRV2 configuration software. With its frequency agility feature, the DRV2 meter will provide you all the flexibility you need when operating in systems using different signal leakage monitoring frequencies.

For operators evolving in overbuilt systems the DRV2 meter has the ability to detect AM or FM channel tags using tone frequencies varying from 3 to 20 Hz. The use of channel tagging improves the meter's ability to properly discriminate the operator's signal leaks from other interfering signal sources, while increasing sensitivity of the DRV2 meter.

Configuration of your DRV2 meter can be accomplished via our PC-based DRV2 configuration software or front panel buttons. The DRV2 can be used in every vehicle as part of your manual leakage detection/repair program or could be used in combination with our fully automated CPAT leakage monitoring solution to increase the effeciency of your leakage control program.


Key Features:

  • High performance find-and-fix leakage detection
  • Fully agile from 118 to 155 MHz
  • User-adjustable frequency in 1kHz steps
  • 10 favourite frequency pre-sets
  • Channel tag compatible
  • Based on our CPAT leakage monitoring system technology